FEATURES

• Refrigerant: R 410 A

• Compact appliances: 1390 x 340 x 1380 mm

• Quality components:

- Twin rotary DC inverter compressor with sound insulation

- High-efficiency heat exchanger with fins for R 410 A

- Helicoidal fan motor

- Plate heat exchanger in AISI 316 stainless steel with heat insulation, ...

• Hydronic module:

- 3-speed circulation pump

- Air vent

- Manometer

- Hydraulic filter

• Control system functions:

There are 2 parts:

• Monitoring/control assembly, with INVERTER technology, for the thermodynamic circuit which can be used:

- to activate the compressor at various speeds,

- to activate the fan at various speeds,

- to activate the electronic regulator and the cycle inversion valve.

• System monitoring/control assembly. Integrated into the heat pump, can be used:

- to activate thermodynamic heating with permanent monitoring of the power requirements of the system,

- to activate the heat pump circulation pump (with anti-freeze and anti-seize functions),

- to manage system alarms through event logging.

• Other advantages:

- Easy access to components

- Dividing panel between the fan and the machinery compartment

- Control panel can be removed for a wider opening

- Stringent manufacturing inspections: helium waterproofing test, electric and dielectric test, hydraulic test, etc...

• Heating (and cooling depending on applications)

• Existing system

• Heat pumps for boiler replacement

• COP of 4,08 and 4,01

• Power varies from 32 to 130% of the nominal power

• Heating mode operation from -20°C to +35°C

• Cooling mode operation from +10°C to +43°C

• Max. temperature of hot water generated in Heating mode: 50°C

Standard equipment:

- Regulation of INVERTER technology with electronic regulator

- Water flow rate sensor

- Proportional "four seasons" regulation

- Low pressure switch

- High pressure switch

- Water filter (to be connected)

- Hydraulic equipment

- System control box and outdoor temperature sensor