FEATURES
· Thermodynamic
water heater with integrated heat pump
· Excellent COP:
3,7
· Cylinder
capacity: 300 litres
· Max. temperature
of hot water generated in Heating mode: 60°C
· Operation from -
5°C to + 35°C in thermodynamic mode (heat pump)
· Adjustable feet
· Refrigerant fluid
R 134 A
· Low noise level:
36 dBA
· Limited height:
1,570 mm
· Quality components:
- Horizontal rotary compressor with sound
insulation
- High efficiency heat exchanger
- 2-speed pressure fan available
- Knock-resistant coating
- Electronic regulation is intuitive and
simple (for users and assistance personnel alike)
- Thermostatic regulator
- Defrosting solenoid valve with hot gas
- High-pressure switch
- Temperature sensor for control and
regulation
- Integrated electric heating element with
safety thermostat
- Dryer filter
- Protective anode.
· Enamelled steel
tank
· Rustproof
magnesium anode
· Regulation operating mode:
- “Eco” mode (Thermodynamic heating),
- Turbo mode (forces the heating element for
faster thermodynamic heating + heating element),
- Day/Night hourly programming,
-
- Load disconnection,
- Dry contact for fan control (e.g.
hygrostat),
- Anti-Legionella
cycle can be programmed.
· Complementary 1.5 kW
electric module functions:
- It begins operating to guarantee a minimum
DHW temperature between 38°C and 43°C
- It begins operating when the outdoor
temperature is outside the operating interval,
- It begins operating in the event of a
malfunction,
- It begins operating when the user selects
Turbo mode.
· Other advantages:
- Appliance can be ducted to recover heat
from the air outdoors, up to 10 m of ducting can be used (flow and return)
- The appliance is easy to transport and to
install because it is not very tall
- Pipe accessories
· Integration with solar thermal plant