FEATURES
Technical
specifications for indoor units
Every indoor unit in the iSERIES
system has its own specific features but there are also features common to all
units in the range, these are listed here below.
Dynamic
Cold Draft, an active protection system preventing the emission
of air that is noticeably colder than ambient temperature during heating
operation and particularly during defrost stages.
Antifreeze,
this protection system prevents the formation of ice on the indoor unit heat
exchanger when the system is working in cooling mode and there are particular
temperature and humidity conditions.
Temperature
settings from +10°C to +32°C both in cooling and heating modes;
the units can therefore be used for indoor low ambient temperature applications
such as in cellars, server rooms and radio stations... They can also be used to
maintain a minimum temperature in spaces that are unused during weekends such
as offices and shops, or places that are unused during the week such as holiday
homes in the mountains or at the seaside...
iFEEL function, a comparative function that
ensures optimum temperature settings based on the values read at the remote
control sensor, the sensor in the indoor unit and the resulting ambient
temperature stratification conditions, which are always different from one room
to another.
Wide
range IR receiver, this
receives the remote control signal even under difficult conditions. It is
equipped with a noise canceller for complete immunity from interference
generated by low energy consumption fluorescent bulbs.
Hardware
or software addressing of units for recognition on
communication bus RS485.
Remote
control addressing for the management of one or more
grouped indoor units, up to a maximum of four units. This function is useful
where several indoor units are situated in a large space (open space offices,
hotel reception rooms, restaurants, etc...), and need to be controlled either
by one or several remote controls.
Five
operating modes: automatic, cool, heat,
dehumidify and fan.
Night
Function for maximum operating economy during the night
without compromising comfort.
High
Power Function, when maximum power is required straight away.
Active/passive
air filters: all air/air units are equipped
with washable mesh filters; a titanium dioxide photocatalytic
anti-bacterial filter,activated via remote control by
invisible dedicated LEDs fitted indoor the unit,
fully compliant with EU regulations concerning UV emissions.
Intelligent
air flap control based on operating mode, which
when combined with the iFEEL function offers the
maximum in comfort to counter air temperature stratification effects.
Automatic
fan (or manual fan) to provide maximum heat (when
required) and the right amount of cool, without creating annoying cold air
draughts or excessive amounts of hot air.
Timer for
programming the operating times of each individual indoor unit, with weekend*
and holiday* controls.
Wireless
and wired universal remote control for all iSERIES
indoor units, with multi-function keypad, LCD graphic display, wall mount and
wired* connection.
Elegant ergonomic interface with discreet micro LEDs
that can be deactivated via remote control,
particularly useful for those that prefer complete darkness at night.
Protective
grilles, which offer the maximum in safety in compliance with
standard EN60335. This allows for installation even at low heights where
children could otherwise potentially touch moving parts such as fans and motors.
Heat
exchangers in high quality copper/aluminium with inorganic hydrophilic
aluminium,
which does not emit odours and provides top performance in heat exchange output
and efficiency.
Plastic
materials with high quality looks and functional properties
(improved thermal stability). As green as possible thanks to the use of noble
acrylics such as PMMA, pure ABS for the parts on view and recycled PS for the
internal structures.
MTAF(B)I/MTA8F(B)I
is a wall-mounted indoor unit with a distinctive
design, ideal for modern spaces and also compatible with more conventional
styles. Combines easily with many different styles and colours found in the
office and at home.
MTAF(B)I/MTA8F(B)I is
available in size A, and at 21 dB(A) is extremely quiet. The unit is equipped
with an active photocatalytic filter, which is able to significantly reduce the
bacterial load in the environment thanks to the titanium dioxide oxidation
process activated by completely concealed special UV LEDs
that are fully compliant with EU standards.
MTAF(B)I/MTA8F(B)I is
designed to provide high energy efficiency and has one very important feature:
it can be recess fitted using the dedicated wall mounting kit.
The front panel made from PMMA, a prized acrylic
material, is dual coated on the back and available in satin white or carbon
fibre black; the transparent border along the panel perimeter creates a bright
frame that responds to colour changes in the environment.
The horizontal central strip in silver conceals the
noiseless remote control signal receiver and the extremely elegant blue and
white micro LEDs. These are very discreet and can
also be deactivated using a function developed specifically for those that
prefer complete darkness at night.
MTAF(B)I/MTA8F(B)I is
also easy to install, thanks to the possibility of being able to connect the
refrigerant pipes either to the horizontal compartment or to the right side;
the bilateral condensation discharge pipe and the possibility of fitting the
unit at below two metres in height (thanks to the protection grille), complete
the flexibility of this high quality indoor unit.
Titanium
Dioxide filters: This filter uses the oxidising power of Titanium
Dioxide (TiO2) to destroy bacteria and inhibit viruses. It also
effectively reduces dust and dirt particles and helps to prevent unpleasant
odours.