FEATURES

K2FAFI is a refined console for low wall installation, at just a few centimetres from the floor and with two-way air flow, up and down, for maximum comfort in summer and winter.

K2FAFI is equipped with DCM (DC motors), in stand by consumes only 75mW and is fitted with a humidity sensor used to modulate the temperature according to the temperature index perceived or to limit the maximum percentage of relative humidity in the environment. In addition, the two fans are activated in a differential mode to provide the best air distribution according to the operating cooling or heating mode.

K2FAFI is made of a prized ABS and is well suited for installation under windows or mid-wall, occupying the smallest space possible.

K2FAFI is available in sizes A and B, whilst still maintaining the same structure and dimensions. It filters and purifies the air using a washable mesh filter and a titanium dioxide photocatalytic filter that can be activated via remote control.

K2FAFI is equipped with an active photocatalytic filter, which is able to significantly reduce the bacterial load in the environment thanks to the titanium dioxide oxidation process activated by completely concealed special UV LEDs that are fully compliant with EU standards.

This filter uses the oxidising power of Titanium Dioxide (TiO₂) to destroy bacteria and inhibit viruses. It also effectively reduces dust and dirt particles and helps to prevent unpleasant odours.

With its 22 dB(A), the unit is extremely quiet thanks to its specially designed structure and two tangential fans managed by inverter-controlled DC motors.

Dynamic Cold Draft, an active protection system preventing the emission of air that is noticeably colder than ambient temperature during heating operation and particularly during defrost stages.

Antifreeze, this protection system prevents the formation of ice on the indoor unit heat exchanger when the system is working in cooling mode and there are particular temperature and humidity conditions.

Temperature settings from +10°C to +32°C both in cooling and heating modes; the units can therefore be used for indoor low ambient temperature applications such as in cellars, server rooms and radio stations... They can also be used to maintain a minimum temperature in spaces that are unused during weekends such as offices and shops, or places that are unused during the week such as holiday homes in the mountains or at the seaside...

iFEEL function, a comparative function that ensures optimum temperature settings based on the values read at the remote control sensor, the sensor in the indoor unit and the resulting ambient temperature stratification conditions, which are always different from one room to another.

Wide range IR receiver, this receives the remote control signal even under difficult conditions. It is equipped with a noise canceller for complete immunity from interference generated by low energy consumption fluorescent bulbs.

Hardware or software addressing of units for recognition on communication bus RS485.

Remote control addressing for the management of one or more grouped indoor units, up to a maximum of four units. This function is useful where several indoor units are situated in a large space (open space offices, hotel reception rooms, restaurants, etc...), and need to be controlled either by one or several remote controls.

Five operating modes: automatic, cool, heat, dehumidify and fan.

Night Function for maximum operating economy during the night without compromising comfort.

High Power Function, when maximum power is required straight away.

Active/passive air filters: all air/air units are equipped with washable mesh filters.

Intelligent air flap control based on operating mode, which when combined with the iFEEL function offers the maximum in comfort to counter air temperature stratification effects.

Automatic fan (or manual fan) to provide maximum heat (when required) and the right amount of cool, without creating annoying cold air draughts or excessive amounts of hot air.

Timer for programming the operating times of each individual indoor unit, with weekend and holiday controls.

Wireless and wired universal remote control for all iSERIES indoor units, with multi-function keypad, LCD graphic display, wall mount and wired connection.

Elegant ergonomic interface with discreet micro LEDs that can be deactivated via remote control, particularly useful for those that prefer complete darkness at night.

Protective grilles, which offer the maximum in safety in compliance with standard EN60335. This allows for installation even at low heights where children could otherwise potentially touch moving parts such as fans and motors.

Heat exchangers in high quality copper/aluminium with inorganic hydrophilic aluminium, which does not emit odours and provides top performance in heat exchange output and efficiency.

Plastic materials with high quality looks and functional properties (improved thermal stability). As green as possible thanks to the use of noble acrylics such as PMMA, pure ABS for the parts on view and recycled PS for the internal structures.