System modularity to meet all requirements
One product only can satisfy all needs and requirements, because it has been projected for for all uses and the most common configurations: the same model of outdoor unit can in fact be matched with the whole range of indoor units: high-wall, floor, floor/ceiling, cassette and ducted models.

R410A =  A Class - High performances and low energy consumption costs
Our air-conditioners are fully compliant to the most recent European regulations concerning the reduction of the energy consumption and the lessening of the atmosphere pollution. In fact our products use the most efficient among the ozone friendly refrigerants:  R410A. Thanks to R410A and to their advanced technology, our air-conditioners achieve the best energy efficiency class: the A class.  The energy labels, indicating the energy efficiency class, have been introduced by the European Directive 2002/31/EC, which makes reference to the standard EN14511 for the determination of the energy class.  “A” class is the best energy class and it is assigned on the basis of specific tables that put in relation the thermal capacity and the energy consumption for each product.
The ratios used to assign the energy class are the following:
E.E.R. = Energy Efficiency Ratio, is the relation between the cooling capacity (kW) and the power consumption in cooling mode (kW).
C.O.P. = Coefficient Of Performance, is the relation between the heating capacity (kW) and the power consumption in heating mode (kW).  The new series of wall air-conditioners TECHNO”8” 98 R can reach a COP up to 5: energy efficiency beyond AA class.

ON/OFF technology
It's the traditional technology which makes the compressor operating always at the same rotation frequence.
This means, thus, that the air-conditioner:
- starts operating in the mode seleceted on the remote control when the temperature set is different from the room temperature;
- stops operating when the temperature in the room achieves the temperature desired and set.

DC Inverter technology: more efficiency and more savings
The advanced technology is called DC Inverter!
The compressor is driven by an electrical motor in direct current, which is able to rotate at variable speed thenks to an inverter circuit that modulates the rotation frequency according to the thermal needs of the room where the air conditioner is installed.

 

Once the tempeature set on the remote control is reached, the compressor begin rotating continuously at a reduced speed: this allows to reduce electrical consumption by approx. 50%.  Different are the advantages of the DC Inverter technology:
- quick reaching of the temperature set;
- maintenance of comfort conditions with imperceptibles variations;
- low noise of the system thanks to the speed digital control of the compressor;
- reduction of the electrical consumption;
- completeness of the DC Inverter range of products, for single and multi applications, with different kinds of indoor unit (high-wall, floor, floor/ceiling, cassette, ducted).

Technologie FULL DC Inverter: SVPWM 180°
The most advanced technology is called  FULL DC Inverter !
The outdoor unit controls all basic parameters  (not only the compressor), that is the compressor capacity, the fan speed and the refrigerant flow.
The SVPWM 180° modulation provides the maximum energy efficiency managing sine wave current for all 360° rotation of the synchronous permanent magnets motors used for the compressor and fan..

Wide operating range
Split and Package systems operate with an outdoor air temèperature up to  -15°C  in cooling mode (low ambient versions) and up to -8°C or -15°C, according to the models, in heating mode (heat pump versions).

Pureness and quality of the air
The hi-wall units TECHNO”8” and TECHNO are equipped with Dioxide of Titanium – Ti02 filter, an innovative filtering system assuring high air quality in the rooms where they are installed. This filter performs a very important action in dust and impurities pulling down, bad smells prevention, bacteria and other micro organisms removal. Dioxide of Titanium is a semiconductor nanomaterial with photo-oxidizing capabilities able to destroy organic and inorganic compounds. Moreover all our indoor units are equipped with washable air filters; to extract and clean the filters is very simple and it is overall important for both the quality of the air and the efficiency of the air conditioner. There is also the possibility to have the active carbon filters that, creating chemical bindings with particles of organic origin, eliminate the greater part of bad smells.

Different versions
- Cooling only;
- Cooling only for low ambinet temperatures;
- Heat pump;

The infrared remote control for all the air-conditioner functions
The infrared remote control allows to control all the functions of our air-conditioners and is characterized by:
- wide LCD display, with symbols and alphanumeric characters;
- possibility to choose among the different modes: cool, heat, dry, fan and auto
- "I Feel" feature, with temperature sensor inside the remote control  (control of both room temperature and temperature set);
- digital timer on the 24hours, 1h on/off timer;
- Function "Progressive Cooling;
- Function High Power (turbo);
- Function Night or Economy;
- Multi-addressing possibility;
- Temperature regulation from 10 to 32°C;
- Flap swinging control.

Silence is golden
Moreover, thanks to our  FULL DC Inverter technology, we control at the same time the compressore and the fan speed, reaching the best performance both in capacity and sound level. Close to the setpoint the TECHNO8 Aand TECHNO indoor unit sound pressure is around 20 dB(A).
The grille of the outdoor units is made of sunlight highly resistant plastic, with aerodynamic contour in order to muffle the noise of the outdoor fan. The compressor is totally insulated with special deadening material giving maximum stillness also when operating at the top of R.P.M.                       The high quality of the materials used and the particular attention paied to the insulation of teh compressor make our air-conditioners very silent.
 

Easy istallation: possibility to choose the most convenient side to discharge the condensate (hi-wall indoor units) Our hi-wall indoor units are equipped with a special system of double way (right or left) to discharge the condensate; this system makes the installation easier and more flexible as the installer may choose the way more suitable to each particular case.to discharge the condensate.

High quality metal housing outdoor units 
TECHNO and TECHNO 8 outdoor units are pre-treated to improve the strength of the polyester powders painting, 300 hours resistant in salt fog (which means no rust for 20 years in normal environmental conditions).