Several good reasons to choose a
heating / cooling Underfloor, in matching with Terminal Units:
- With the heating/cooling Underfloor , the comfort in
all seasons passes through the ground.
- There is always a well-being sensation: the
temperature of the floor is neither too hot, nor too cold: it's perfectly
subdived in the house.
- It's the absolute silence.
- It's hygienic and healty: in both summer and winter the
units don't create air currents.
- It's aesthetically pleasing: the walls are completely
free to let your fantasy express in the internal furniture.
- It's safe: the floor is maintained at the correct
temperature and this eliminates any risk of condensation.
- Energy saving is guaranteed by the high coefficients of
performances of the Heat pumps: for 1 kWh of electrical power spent, the
Heat pump produces 4 kWh of heat in winter and 3kWh of cold in summer.
- Moreover, for the investments in Air/Water Heat Pump
like principal source of heating of its own house, many European countries
recognize financial benefits, depending on the Financial Law of each
particular state.
- The heating/cooling Underfloor can be matched with
Terminal Units in "combination"
solution:
Underfloor in the first zone, during the daytime, and
Terminal Units in the second zone, during the night-time, for example.
- The various models of Terminal Units offer a real
choice, making it possible to keep the aesthetic appearance of each
room: wall mounted, floor type or integrated into a false ceiling or
the fixture and fittings. Each Terminal Unit is equipped with a
filter, which traps dust. The active carbon filter, available on
some models, deodorises the ambient. In summer the Terminal Units
eliminate the excessive humidity.
- Each Terminal Unit is controlled, room by
room, to ensure personalized comfort by an ambient thermostat (RCC)
or by the infrared remote controller with the temperature sensor
incorporated.
- The preset temperature (heating or air-conditioning) is very quickly
attained, according to the desires of the user.
|
|
The available accessories are :
Additional electric
heater module - MCE8
or MCE10, control unit included
- The additional electric heater module grants the
heating complement of Your installation when the Heat Pump is not enough.
- This module is controlled by the electronic
regulation and privileges the thermodynamic heating to contribute to the
power consumption reduction.
- Flexibility in use: to answer with precision to
your need for heating, the additional module has 2 stages of power.
- Flexibility in installation:it can be installed
outside directly on the heat pump PHR or inside in technical room.
- Safety: the module is equipped with 2 thermal
safety measures (1 with automatic rearmament and 1 with manual
rearmament) and with a pressure controller of lack of water.
|
Models |
Electric
heating capacity
(kW) |
Heat Pump models concerned |
MCE8 |
7,5 (5 + 2,5) |
PHRT 7-9-12-16 |
MCE10 |
9,9 (6,6 + 3,3) |
PHRT 12-16
(three-phase models only) |
|
Additional electric heater module
MCE8 or MCE10
 |
