Several good reasons to choose a
2-zone heating / cooling Underfloor:
- With the heating/cooling Underfloor , the comfort in
all seasons passes through the ground.
- There is always a well-being sensation: the
temperature of the floor is neither too hot, nor too cold: it's perfectly
subdived in the house.
- It's the absolute silence.
- It's hygienic and healty: in both summer and winter the
units don't create air currents.
- It's aesthetically pleasing: the walls are completely
free to let your fantasy express in the internal furniture.
- It's safe: the floor is maintained at the correct
temperature and this eliminates any risk of condensation.
- Energy saving is guaranteed by the high coefficients of
performances of the Heat pumps: for 1 kWh of electrical power spent, the
Heat pump produces 4 kWh of heat in winter and 3kWh of cold in summer.
- Moreover, for the investments in Air/Water Heat Pump
like principal source of heating of its own house, many European countries
recognize financial benefits, depending on the Financial Law of each
particular state.
- The heating/cooling Underfloor can be divided in
two zones (for example day-time zone and night-time zone)
with an independent management of each of the two zones.
|
|
The available accessories are :
Additional electric
heater module - MCE8
or MEC10, control unit included
- The additional electric heater module grants the
heating complement of Your installation when the Heat Pump is not enough.
- This module is controlled by the electronic
regulation and privileges the thermodynamic heating to contribute to the
power consumption reduction.
- Flexibility in use: to answer with precision to
your need for heating, the additional module has 2 stages of power.
- Flexibility in installation:it can be installed
outside directly on the heat pump PHR or inside in technical room.
- Safety: the module is equipped with 2 thermal
safety measures (1 with automatic rearmament and 1 with manual
rearmament) and with a pressure controller of lack of water.
Models |
Electric
heating capacity
(kW) |
Heat
Pump models concerned |
MCE8 |
7,5 (5 + 2,5) |
PHR 6-8-11-15-17-20 |
MCE10 |
9,9 (6,6 + 3,3) |
PHR 11-15-17-20 (three-phase models only) |
|
Additional electric heater module
MCE8 or MCE10
 |
Dual-zone Floor module - M2ZP
- It's the hydraulic separation module for 2-floor
zones, necessary to supply each of the 2 zones of your installation.
- Each zone starting point is provided with a
circulating pump and a 3-way valve to control the water temperature.
- An ambient temperature sensor for the second zone
is supplied with this module.
- An ambient temperature sensor can be fitted for
zone 1 if the control unit is not in zone 1.
|
Dual- zone Floor module - M2ZP
 |
Aquaset control unit (supplied with MCE)
- Convivial and easy to use, this electronic control
system allows to control the whole installation PHR + MC8/10 module.
- lt makes it possible to choose and visualize the
various operating modes: Heating/Cooling/Defrosting/Stop.
- It makes it possible to select a heating regime:
Comfort or Economy.
- It is possible to make hourly programs to precisely
meet the individual specific needs.
- The unit control incorporates an ambient air
temperature sensor.
- Hydraulic connection Kit PHR with module MCE 8/10: this preassembled kit makes easier the connection between the heat pump and the electric heater module when this one is directly mounted on the heat pump.
|
Aquaset control unit
 |
